{"id":887,"date":"2026-05-22T14:39:48","date_gmt":"2026-05-22T14:39:48","guid":{"rendered":"https:\/\/zhihongplastic.com\/?p=887"},"modified":"2026-07-22T02:17:27","modified_gmt":"2026-07-22T02:17:27","slug":"%e3%81%be%e3%81%aa%e6%9d%bf%e7%94%a8%e9%a3%9f%e5%93%81%e3%82%b0%e3%83%ac%e3%83%bc%e3%83%89hdpe%e3%82%b7%e3%83%bc%e3%83%88","status":"publish","type":"post","link":"https:\/\/zhihongplastic.com\/ja\/%e3%81%be%e3%81%aa%e6%9d%bf%e7%94%a8%e9%a3%9f%e5%93%81%e3%82%b0%e3%83%ac%e3%83%bc%e3%83%89hdpe%e3%82%b7%e3%83%bc%e3%83%88\/","title":{"rendered":"\u307e\u306a\u677f\u306e\u305f\u3081\u306e\u98df\u54c1\u7b49\u7d1a\u306eHDPE\u30b7\u30fc\u30c8"},"content":{"rendered":"<p class=\"wp-block-paragraph\">HDPE is widely considered for commercial cutting boards and food-processing work surfaces because it is tough, machinable and has very low water absorption. However, \u201cHDPE\u201d and \u201cfood grade\u201d are not interchangeable terms. The resin formulation, colorants, additives, manufacturing controls, intended food and conditions of use all affect compliance.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For buyers, the first question should not be \u201cIs all HDPE food safe?\u201d It should be: <strong>Can this specific sheet grade be supplied with the documents required for my market and intended use?<\/strong><\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"800\" height=\"600\" src=\"https:\/\/zhihongplastic.com\/wp-content\/uploads\/2026\/05\/image.png\" alt=\"Blue HDPE sheet stock for custom cutting board fabrication\" class=\"wp-image-882\" srcset=\"https:\/\/zhihongplastic.com\/wp-content\/uploads\/2026\/05\/image.png 800w, https:\/\/zhihongplastic.com\/wp-content\/uploads\/2026\/05\/image-300x225.png 300w, https:\/\/zhihongplastic.com\/wp-content\/uploads\/2026\/05\/image-768x576.png 768w, https:\/\/zhihongplastic.com\/wp-content\/uploads\/2026\/05\/image-16x12.png 16w\" sizes=\"auto, (max-width: 800px) 100vw, 800px\" \/><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">What \u201cfood grade HDPE\u201d should mean in a purchase order<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A generic statement such as \u201cFDA approved\u201d is not enough to identify a finished sheet. In the United States, polyethylene food-contact use is addressed through applicable authorizations and limitations, including <a href=\"https:\/\/www.ecfr.gov\/current\/title-21\/part-177\/section-177.1520\" rel=\"nofollow noopener\" target=\"_blank\">21 CFR 177.1520<\/a>. FDA guidance also explains that compliance depends on the identity, specifications and conditions of use of each component.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For the European Union, plastic food-contact materials are covered by <a href=\"https:\/\/eur-lex.europa.eu\/eli\/reg\/2011\/10\/oj\" rel=\"nofollow noopener\" target=\"_blank\">Commission Regulation (EU) No 10\/2011<\/a> and related requirements. The buyer should identify the destination market, food type, contact time and temperature so the correct documentation and testing scope can be discussed.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Do not assume that a natural, white or colored sheet complies because of its appearance. Pigments and other additives are part of the finished formulation. Ask for documents that identify the actual grade and production batch where required. Availability must be confirmed before ordering.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Where HDPE cutting-board sheet is used<\/h2>\n\n\n\n<ul class=\"wp-block-list\"><li>Commercial kitchen cutting boards and replaceable inserts<\/li><li>Meat, seafood, bakery, fruit and vegetable preparation surfaces<\/li><li>Food-processing table tops and work stations<\/li><li>Machine guides, spacers and non-structural components where the specified grade is suitable<\/li><li>Custom routed boards with handles, grooves, holes or rounded corners<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Suitability still depends on the finished part and its actual use. A cutting surface, conveyor component and machine wear pad may have different mechanical, sanitation and regulatory requirements even when all are made from polyethylene.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">How to choose cutting-board thickness<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Thickness should be selected with the board length and width, support, cutting force, handling method and resurfacing plan. The ranges below are purchasing starting points rather than universal rules.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Nominal thickness<\/th><th>Possible starting application<\/th><th>Checks before ordering<\/th><\/tr><\/thead><tbody><tr><td>6\u201310 mm<\/td><td>Small, fully supported inserts or light-duty boards<\/td><td>Movement, edge support, warping and cleaning access<\/td><\/tr><tr><td>12\u201315 mm<\/td><td>General commercial boards with suitable support<\/td><td>Overall size, cutting force, handle\/groove depth and flatness<\/td><\/tr><tr><td>20\u201330 mm<\/td><td>Larger work surfaces and heavier cutting service<\/td><td>Table support, part weight, machining allowance and lifting<\/td><\/tr><tr><td>Above 30 mm<\/td><td>Heavy custom blocks or parts requiring substantial machining<\/td><td>Finished dimensions, internal stress, tolerance and handling equipment<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">A thicker sheet may feel more stable, but thickness alone does not prevent deflection. Support spacing and fixing method matter. See our detailed guide to <a href=\"https:\/\/zhihongplastic.com\/ja\/%e5%b7%a5%e6%a5%ad%e7%94%a8hdpe%e3%82%b7%e3%83%bc%e3%83%88%e3%81%ae%e5%8e%9a%e3%81%95%e3%82%92%e9%81%b8%e3%81%b6\/\">choosing HDPE sheet thickness<\/a> for the other factors that should be specified.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Surface, color and fabrication details<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>\u7279\u5fb4<\/th><th>Why it matters<\/th><th>What to put in the drawing or RFQ<\/th><\/tr><\/thead><tbody><tr><td>\u8868\u9762\u4ed5\u4e0a\u3052<\/td><td>Affects grip, cleaning and visible knife marks<\/td><td>Smooth or textured face; whether both faces are usable<\/td><\/tr><tr><td>\u30ab\u30e9\u30fc<\/td><td>May support a facility\u2019s segregation system<\/td><td>Required color and applicable compliance documentation<\/td><\/tr><tr><td>Edges and corners<\/td><td>Affect handling and cleanability<\/td><td>Edge radius, corner radius and deburring requirement<\/td><\/tr><tr><td>Juice or liquid groove<\/td><td>Reduces the remaining section and changes cleaning detail<\/td><td>Width, depth, path and distance from the edge<\/td><\/tr><tr><td>Handles and holes<\/td><td>May create stress concentrations or hygiene traps<\/td><td>Size, position, radius and finish<\/td><\/tr><tr><td>Flatness and tolerance<\/td><td>Affect fit on tables and machine frames<\/td><td>Critical finished dimensions and inspection method<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Color coding can help operators separate food-preparation tasks, but color by itself does not establish food-contact compliance or prevent cross-contamination. The site\u2019s hygiene procedures, cleaning validation and staff practices remain essential.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Cleaning, inspection and replacement<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The cleaning method must suit both the material grade and the food facility\u2019s sanitation program. Specify cleaning chemicals, concentration, temperature and contact time when buying the board. Very hot cleaning cycles or unsuitable chemicals can affect performance.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Inspect boards for deep cuts, gouges, cracking, excessive warping, loose fastening and areas that cannot be effectively cleaned. The facility should define replacement or resurfacing criteria within its food-safety system. A blanket service-life claim is not reliable because use intensity and maintenance vary widely.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Documents to request before approval<\/h2>\n\n\n\n<ul class=\"wp-block-list\"><li>Product identification and grade<\/li><li>Applicable food-contact declaration or letter for the destination market<\/li><li>Test report or supporting documentation when required<\/li><li>Scope and limitations: food type, time and temperature conditions<\/li><li>Color\/additive coverage for the ordered formulation<\/li><li>Batch identification and traceability requirements<\/li><li>Dimensions, tolerance and inspection record<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Ask for the documents before placing the order, not after shipment. A certificate for a different resin, color or product does not automatically cover the sheet you receive.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">RFQ checklist for custom HDPE cutting boards<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table><tbody><tr><th>Market and use<\/th><td>Destination country, food type, contact time and temperature<\/td><\/tr><tr><th>Compliance<\/th><td>Required regulation, declaration, testing and traceability<\/td><\/tr><tr><th>Board specification<\/th><td>Color, thickness, length, width, surface and quantity<\/td><\/tr><tr><th>\u52a0\u5de5<\/th><td>Cut-to-size, radiused edges, grooves, handles, holes or CNC profile<\/td><\/tr><tr><th>\u691c\u67fb<\/th><td>Critical dimensions, flatness, finish and report requirements<\/td><\/tr><tr><th>\u914d\u9001<\/th><td>Destination, packing, labeling and required date<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Zhihong\u30d7\u30e9\u30b9\u30c1\u30c3\u30af\u88fd\u54c1 <a href=\"https:\/\/zhihongplastic.com\/ja\/%e5%b7%a5%e6%a5%ad%e7%94%a8hdpe%e3%82%b7%e3%83%bc%e3%83%88\/\">\u9ad8\u5bc6\u5ea6\u30dd\u30ea\u30a8\u30c1\u30ec\u30f3\u30b7\u30fc\u30c8<\/a> and drawing-based cutting and machining. Food-contact documentation, colors, dimensions and minimum order depend on the requested grade and must be confirmed in the quotation.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Frequently asked questions<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Is every HDPE sheet food grade?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">No. Compliance applies to a specific formulation and intended conditions of use. Confirm the grade, additives, color and supporting documents for the ordered sheet.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Can you make a board from our drawing?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Yes, subject to a manufacturability review. Send the drawing revision, finished dimensions, tolerances, edge details, quantity and documentation requirements.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Does a colored board automatically meet a hygiene standard?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">No. Color may support an internal segregation plan, but compliance and hygienic use depend on the actual material documentation, cleaning procedure, inspection and handling controls.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Request a documented quotation:<\/strong> <a href=\"https:\/\/zhihongplastic.com\/ja\/%e3%81%8a%e5%95%8f%e3%81%84%e5%90%88%e3%82%8f%e3%81%9b\/\">send the destination market, intended food contact, dimensions, color, drawing and quantity<\/a>.<\/p>","protected":false},"excerpt":{"rendered":"<p>HDPE is widely considered for commercial cutting boards and food-processing work surfaces because it is tough, machinable and has very low water absorption. However, \u201cHDPE\u201d and \u201cfood grade\u201d are not interchangeable terms. The resin formulation, colorants, additives, manufacturing controls, intended food and conditions of use all affect compliance. For buyers, the first question should not [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":882,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3,10],"tags":[],"class_list":["post-887","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","category-industry-news"],"_links":{"self":[{"href":"https:\/\/zhihongplastic.com\/ja\/wp-json\/wp\/v2\/posts\/887","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/zhihongplastic.com\/ja\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/zhihongplastic.com\/ja\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/zhihongplastic.com\/ja\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/zhihongplastic.com\/ja\/wp-json\/wp\/v2\/comments?post=887"}],"version-history":[{"count":5,"href":"https:\/\/zhihongplastic.com\/ja\/wp-json\/wp\/v2\/posts\/887\/revisions"}],"predecessor-version":[{"id":1159,"href":"https:\/\/zhihongplastic.com\/ja\/wp-json\/wp\/v2\/posts\/887\/revisions\/1159"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/zhihongplastic.com\/ja\/wp-json\/wp\/v2\/media\/882"}],"wp:attachment":[{"href":"https:\/\/zhihongplastic.com\/ja\/wp-json\/wp\/v2\/media?parent=887"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/zhihongplastic.com\/ja\/wp-json\/wp\/v2\/categories?post=887"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/zhihongplastic.com\/ja\/wp-json\/wp\/v2\/tags?post=887"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}