Quick wins: Fewer stuck vehicles, less regrading, cleaner site exits, safer pedestrian routes, and visibly organized access roads.
How HDPE Road Mats Improve Safety
1) Anti-slip surface: Deep chevron/diamond textures increase friction in wet, muddy, or grassy conditions—reducing vehicle wheel-spin and worker slip incidents. 2) Load distribution: HDPE spreads point loads, minimizing ruts, sinkage, and ankle-twist hazards. 3) Defined access routes: Bright-edge or high-contrast mats mark safe paths for vehicles and pedestrians. 4) Cable/hose protection: Mats create clean cross-overs so hoses and temporary cables don’t become trip hazards. 5) Non-conductive & chemical resistant: Safer around utilities; resistant to oil, salt, and most chemicals for clean, stable footing.
How They Lower Total Project Cost
A) Replace Plywood Cycles: Plywood often breaks, saturates, and delaminates—HDPE mats are reusable hundreds of times with simple washing. B) Prevent Ground Damage: Less soil remediation and turf replacement at handover. C) Avoid Tow-outs: Every avoided recovery (machine + crew downtime) protects margins. D) Fast Setup/Strike: Two workers can rapidly deploy with simple connectors; fewer man-hours per job. E) Lower Logistics: High strength-to-weight; more mats per truck, less fuel and handling.
Example ROI (illustrative): If plywood costs $18/use (buy, breakage, disposal, handling) and an HDPE mat costs $180 and lasts 40 uses, your per-use cost drops to $4.50, excluding the added savings from avoided ground repair and tow-outs.
Typical Specifications (Customizable)
We extrude and machine in-house. Ask for logo embossing, beveled edges, serial numbers、 そして color/UV packages.
Double-sided anti-slip (chevron/diamond); smooth + textured available
Sizes
2440×1220 mm (4×8 ft), 3000×1000 mm (3×10 ft), 2400×1200 mm; custom CNC cut
厚さ
10–15 mm (light/ute), 15–18 mm (general access), 18–20+ mm (heavy cranes)*
重さ
~22–45 kg per mat depending on size/thickness
Connectors
2-way/4-way metal or reinforced polymer, quick-fit pins
色
Black (standard), green, yellow, custom colors
Edge Options
Beveled leading edges for pedestrian routes and dollies
Operating Temp
-40 °C to +80 °C (material dependent)
* Load capacity depends on ground conditions, mat thickness, contact area, and vehicle type. Tell us your machine weight, tire/track type, and soil for a tailored recommendation.
